开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
The company is located in Guangzhou Economic and Technological Development Zone, covering an area of 30 acres, with convenient transportation and complete supporting facilities.


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company has two major product categories: high-performance fiber composite equipment and advanced composite innovation hub..


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Download product technical information and promotional information.


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Including composite materials industry information and corporate news

开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company recruitment latest job information, company job introduction, company talent development platform

开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company address, company map navigation, contact information of each department 

language:English
3
main business
【Winder series; High-performance fiber equipment series; Plastic woven equipment series】
Application
Tape stretching line AEG1600
Model AEG1600
Extrusion capacity 650 kg/h
Die lip width 1500mm
Max. linear speed 450m/min
Application
The machine is designed on the basis of PP material, if produce both PP & PE, the buyer should inform the seller in advance.

Each line consists of:

Pos

Description

1

Extruder

 

Vacuum loading system brand: Shini TAIWAN

Brand of screw barrel: Golden conch   

Dia. of screw: Φ130mm

L/D of screw: 33:1  

Screw material: Nitride 38GrMoAl

Max. rotation of screw: 115r/min

Max. extrusion: 650kg/h (Depending upon tape characteristics and material)

Barrel heating use aluminum heater, solid relay control the heating

Barrel heating total power and heating zones: 52.5KW 7zones

Die-head using built-in stainless steel heating pipe and solid-state relay

T-die brand: Jing cheng

Length of die-head:1600mm

Effective length:1500mm

Exceed film thickness: 0.07-0.35mm

Die-head total heating power and heating zones: 18kw  6zones

Melt pump brand: Maag 15kw

Siemens  AC motor  

Main motor: Siemens AC motor

Motor power: 160kw

Screen change method: Auto-belt change screen (Double-net)

 

1

Cooling water tank

 

Material: stainless steel

The tank up and down adjustable

Manual up and down adjust by chain wheel

 

1

Haul-offunit

 

Water remove plate     2sets

Water snap system     1set   motor power 3kw

Film lifting system      1set   motor power 4kw

Water absorb system   2sets

Water absorb motor power 3kw.

 

1

Slitting system

 

Slitting shaft type: 6 side blade rotate

Specification: non-stop changing blade, can be adjusted up &down, and right &left.

 

1

Drawing unit

 

Roller external dia.: 420mm

Roller surface treatmenthard chromium plating, glazing Treatment 

Draw unit Motor power: 7.5kw

Max. Line speed: 80m/min

 

1

Edge-film crushing recycling system

 

For direct return of narrow edge trims of non-stretched film into the extruder, consisting of a shredding mill with blower, piping, and air  separator    

Shredding mill motor                     2.2kw

Blower motor                            2.2kw

Blower speed                            2840rpm

Rotate blade speed                       1430rpm

Crushing capacity                        20kg/h

 

1

Double-lay stretching hot air oven

 

Oven length: 6000mm

Oven width: 1800mm

Effective using width: 1650mm

Heating power: 80kw

Max. air speed: 10-20m/s

MotorSiemens

Fan power: 7.5kwx2sets

Fan rotation speed: 1440r/min

Up oven pneumatic open

Heating using built-in heating pipe and power regulator

 

1

8 roller stretching unit

 

Roller size: Φ420mm (Bearing SKF)

Roller surface deal: Plate Cr, mirror deal (Equip safety cover)

Stretching 4 roller power : 18.5kw

Max. Line speed: 450m/min

Water chilling two roller motor power: 5.5kw

Oil heating two roller motor power: 5.5kw

Heating power of mold temperature controller: 24kw

 

1

Waste yarn collection system

 

Motor power 15kw

 

 

270

Winder 

 

Model:ATA600DH

According to different yarns, choose different winding parameters by setting of user  independently, perfect spindles, wide usage;

Adopting continuous winding technique, make sure the constant tension of the whole spindle, reduce yarn breakage rate  in circular loom, reduce deviation of fabric width;

Max. winding diameter up to 180 mm, reduce times to change spindles strongly, save labors, increasing usage time of warp yarn;

Simple structure, little amounts of fast moving spare parts, high intellectualization.


Technical Parameter
Working width 1500mm
Die lip width 1600mm
Die material Mold steel 4Cr13, surface by hard chrome treatment
Net film width 150mm
Extruder power 185Kw AC motor 
Extrusion capacity Max.650 kg/h
Screw speed 20-115r/min
Screw Screw dia. 130mm and  L/D 33:1
Screw and barrel material 38 CrMoAlA Nitrogen treatment
Stretching ratio 4-10
Hot air oven length 6000mm
Stretching roller size Φ420×1650mm
Max. linear speed 500m/min
Rated power 450kw
Power consumption 300kw
Winder number 270spindles (This unit standard deploy)
Dimension 48000x3900x3000mm
Weight Around 40tons

Play video