开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
The company is located in Guangzhou Economic and Technological Development Zone, covering an area of 30 acres, with convenient transportation and complete supporting facilities.


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company has two major product categories: high-performance fiber composite equipment and advanced composite innovation hub..


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Download product technical information and promotional information.


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Including composite materials industry information and corporate news

开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company recruitment latest job information, company job introduction, company talent development platform

开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company address, company map navigation, contact information of each department 

language:English
3
main business
【Winder series; High-performance fiber equipment series; Plastic woven equipment series】
Application
Tape stretching line AEG1300
Model AEG1300
Extrusion capacity 550kg
Die lip width 1300mm
Max. linear speed 450m/min
Application
The machine is designed on the basis of PP material, if produce both PP & PE, the buyer should inform the seller in advance.

Each line consists of:

Pos

Description

1

Extruder

 

Vacuum Loading system brand: Shini TAIWAN

 

Brand of screw barrel: Golden conch   

 

Dia. of screw: Φ120mm

 

L/D of screw: 33:1  

 

Screw material: Nitride 38GrMoAl

 

Max. rotation of screw: 115r/min

 

Max. extrusion: 550kg/h (Depending upon tape characteristics and material)

 

Barrel heating use aluminum heater, solid relay control the heating

 

Barrel heating total power and heating zones: 52.5KW 7zones

 

Die-head using built-in stainless steel heating pipe and solid-state relay

 

T-die brand: Jing Cheng

 

Length of die-head:1300mm

 

Effective length:1200mm

Exceed film thickness: 0.07-0.35mm

 

Die-head total heating power and heating zones: 15kw  5zones

 

Melt pump brand: Maag  11kw

 

Siemens AC motor  

 

Main motor: Siemens AC motor

 

Motor power: 160kw

 

Screen change method: Auto-belt change screen (Double-net)

 

 

1

Cooling water tank

 

Material: stainless steel

 

The tank up and down adjustable

 

Manual up and down adjust by chain wheel

 

 

1

Haul-off unit

 

Water remove plate 2sets

 

Water snap system 1set  motor power 3kw

 

Film lifting system    1set motor power  kw

 

Water absorb system 2sets

 

Water absorb motor power 3kw.

 

 

1

Slitting system

 

Slitting shaft type: 6 side blade rotate

 

Specification: non-stop changing blade, can be adjust up & down, and right & left.

 

 

1

Drawing unit

 

Roller external dia.: 420mm

 

Roller surface treatmenthard chromium plating , glazingTreatment

 

Draw unit Motor power: 7.5kw

 

Max. Line speed: 80m/min

 

 

1

Edge-film crushing recycling system

 

For direct return of narrow edge trims of non-stretched film into the extruder, consisting of a shredding mill with blower, piping, and air separator    

 

Shredding mill motor                     2.2kw

 

Blower motor                           2.2kw

 

Blower speed                           2840rpm

 

Rotate blade speed                      1430RPM

 

Crushing capacity                       20kg/h

 

 

1

Double-lay stretching hot air oven

 

Oven length: 6000mm

 

Oven width: 1600mm

 

Effective using width: 1350mm

 

Heating power: 80kw

 

Max. air speed: 10-20m/s

 

Motor: Siemens

 

Fan power: 7.5KW×2sets

 

Fan rotation speed: 1440r/min

 

Up oven pneumatic open

 

Heating using built-in heating pipe and power regulator

 

 

1

8 roller stretching unit

 

Roller size: Φ420mm (Bearing SKF)

 

Roller surface deal: Plate Cr, mirror deal (Equip safety cover)

 

Stretching 4 roller power : 18.5kw

 

Max. Line speed : 450m/min

 

Water chilling two roller motor power: 5.5kw

 

Heating power of mold temperature controller 24kw

 

Oil heating two roller motor power: 5.5kw

 

 

1

Waste yarn collection system

 

Motor power 15kw

 

 

216

Winder

 

ATA600DH   216 Spindles

 

According to different yarns, choose different winding parameters by setting of user  independently, perfect spindles, wide usage;

 

Adopting continuous winding technique, make sure the constant tension of the whole spindle, reduce yarn breakage rate  in circular loom, reduce deviation of fabric width;

 

Max. Winding Diameter up to 180 mm, reduce times to change spindles strongly, save labors, increasing usage time of warp yarn;

 

Simple structure, little amounts of fast moving spareparts, high intellectualization.


Technical Parameter
Working width 1200mm
Die lip width 1300mm
Die material Mold steel 4Cr13, surface by hard chrome treatment
Net film width Approx.150mm
Extruder power 160Kw  AC motor
Extrusion capacity Max.550 kg/h
Screw speed 20-115r/min
Screw Screw dia. 120mm and  L/D 33:1
Screw and barrel material 38 CrMoAlA Nitrogen treatment
Stretching ratio 4-10
Hot air oven length 6000mm
Stretching roller size Φ420×1350mm
Max. linear speed 450m/min
Rated power 400KW
Power consumption 330KW
Winder number 216spindles (This unit standard deploy)
Dimension 45000x3600x3000mm
Weight Around 35tons

Play video