开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
The company is located in Guangzhou Economic and Technological Development Zone, covering an area of 30 acres, with convenient transportation and complete supporting facilities.


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company has two major product categories: high-performance fiber composite equipment and advanced composite innovation hub..


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Download product technical information and promotional information.


开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Including composite materials industry information and corporate news

开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company recruitment latest job information, company job introduction, company talent development platform

开云官方网站
ATA IMS  Guangzhou  Co., Ltd.
Company address, company map navigation, contact information of each department 

language:English
3
main business
【Winder series; High-performance fiber equipment series; Plastic woven equipment series】
Application
Tape stretching line AEG1000
Model AEG1000
Extrusion capacity Max.400kg/h
Die lip width 1000mm
Max. linear speed 450m/min
Application
The machine is designed on the basis of PP material, if produce both PP & PE, the buyer should inform the seller in advance.
Each line consists of
Extruder
  • Vacuum loading system brand: Shini TAIWAN
  • Dia. of screw: Φ110mm; L/D of screw: 33:1
  • Screw material: Nitride 38GrMoAl
  • Max. rotation of screw: 115r/min
  • Max. extrusion: 400kg/h
  • Barrel heating use aluminum heater, solid relay control the heating
  • Barrel heating total power and heating zones: 52.5kw 7zones
  • Die-head using built-in stainless steel heating pipe and solid-state relay
  • Length of die-head:1000MM
  • Effective length:850mm
  • Exceed film thickness: 0.07-0.35mm
  • Die-head total heating power and heating zones: 18kw 6zones
  • Main motor: Siemens AC motor
  • Motor power:132kw
Haul-off unit/Slitting system
    1.Haul-off unit
  • Water remove plate 2 sets
  • Water snap system 1 set motor power 3kw
  • Film lifting system 1 set motor power 4kw
  • Water absorb system 2 sets
  • Water absorb motor power 3kw.
  • 2.Slitting system
  • Slitting shaft type: 6 side blade rotate
  • Specification: non-stop changing blade, can be adjust up & down, and right & left.
Drawing unit
  • Roller size: Φ420mm (Bearing SKF)
  • Roller surface deal: Plate Cr, mirror deal (Equip safety cover)
  • Stretching 4 roller power: 18.5kw
  • Max. Line speed: 450m/min
  • Water chiller two roller motor power: 5.5kw
  • Heating power of mold temperature controller: 24kw
  • Oil heating two roller motor power: 5.5kw
Hot air oven
  • Oven Size:6000X1400mm
  • Effective using width: 1150mm
  • Heating power: 70kw
  • Fan power: 5.5kw×2sets
  • Fan rotation speed: 1440r/min
  • Up oven pneumatic open
  • Heating using built-in heating pipe and power regulator
ATA600DH Winder
  • According to different yarns, choose different winding parameters by setting of user independently, perfect spindles, wide usage;
  • Adopting continuous winding technique, make sure the constant tension of the whole spindle, reduce yarn breakage rate in circular loom, reduce deviation of fabric width;
  • Max. Winding Diameter up to 180 mm, reduce times to change spindles strongly, save labors, increasing usage time of warp yarn;
  • Simple structure, little amounts of fast moving spare parts, high intellectualization.

Technical Parameter
Working width 850mm
Die lip width 1000mm
Die material Mold steel 4Cr13, surface by hard chrome treatment
Net film width Approx.130mm
Extruder power 132Kw  AC motor
Extrusion capacity Max.400kg/h
Screw speed 20-115r/min
Screw Screw dia. 110mm and  L/D 33:1
Screw and barrel material 38 CrMoAlA Nitrogen treatment
Stretching ratio 4-10
Hot air oven length 6000mm
Stretching roller size Φ420×1350mm
Max. linear speed 450m/min
Rated power 350kw
Power consumption 180kw
Winder number 160spindles (This unit standard deploy)
Dimension 42000x3300x3000mm
Weight Around 30Tons

Play video